Single Pilot Check valve is used to lock a cylinder or part of a circuit and to prevent reverse flow until the pilot pressure is applied. The purpose of the check valve is to permit flow in one direction and block it in the opposite direction. In a free flow direction through the inlet, the ball is unseated and the flow is out of the cylinder port. When the control valve is centered, the load is locked. With presssure applied at the pilot piston, the ball is held open thereby allowing return flow. The mechanism is internally piloted. The directional valve cylinder ports should be connected to the tank in the centre condition.
The Single Pilot Check valve:
is made up of of extruded aluminium alloy body
the internal parts of the single pilot check valve are made of hardened steel
the flow rate of the single pilot check valve is 30 LPM.
it functions with a working presssure of 210 kg/cm3
has a damped pilot piston to reduce damaging shocks.
comes with easily replaceable seats in some models.