Pressure Gauges
Standard Pressure Gauges
SS High Pressure Gauges
Freon Gauges
Diaphragm Pressure Gauges
Oxygen / Acetylene / Halon / Hydrogen pressure gauges
Homogenizer gauges
Weather proof gauges
Temperature Gauges
Dial Thermometers:
-
Dial : 63mm, 100mm, 150mm, 250mm
-
Connection : Bottom, Back, Angle type
-
Type : Stem Type, Capillary tube Type
-
Model : Bi-Mettalic, Inert Gas Filled, Mercury-in-Steel
-
Connection : Bottom
-
Back Process Connection : 1/2″ (Standard)(Other Size also available on your Request)
-
Ranges : 0 to 50 Deg.C, 60 Deg.C, 80 Deg.C, 100 Deg.C upto 650 Deg.C
Applications:
-
Availalble in dial sizes 2-1/2″, 4″ & 6″
-
Back, Bottom or All-Angle (Every Angle) Type
-
Complete Stainless Steel Construction
-
Dry or Liquid Filled (Glycerin or Silicon)
-
Any standard thread connection
-
Ranges from -40 to +500 deg C
-
Pharmaceutical, Chemical, Petrochemical, Refinery, Paper, & Pulp, Sugar, Breweries, Food & Beverages, Cement Industries, etc
-
Custom Stem Lengths, Stem Diameter, Temp. Ranges
-
Custom Designed Dials
-
Accessories: Thermowells
Pressure Gauge Accessories
PIGTAIL SYPHONS
The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation.
-
U Type Siphons are Suitable for Veritcal Pipe Mounting
-
Coil / Pigtail Siphons are Suitable for Horizontal Pipe Mounting
PRESSURE GAUGE PROTECTORS
Also known as over pressure protectors are used to protect the pressure gauge from over pressure. The gauge saver has a predefined setpoint at which it will not allow any media to flow. The setpoint can be varied for a max span of 10% of set pressure. Available for set pressure ranges from 1000mmwc (0.1 kg/cm2) upto 600kg/cm2.
-
AG1 – 0.1 to 0.5 kg/cm2
-
AG2 – 0.6 to 1.6 kg/cm2
-
AG3 – 2 to 280 kg/cm2
-
AG4 – 300 to 600 kg/cm2
Gauge Cocks are used for flow control like simple on/off, isolation applications. Suitable for pressure upto 30 kg/cm2.
-
Available in 2 way / 3way type
-
Material SS316 or SS304 or Brass
-
3/8”, ½” bsp or npt connection
The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation.
